FSU200 / FPDI200

Replacement for CRT Screens With TTL/CGA Interface

Operating Instructions to the FSU201
Replacement Guide: Replacing the D145F/D150F CRT Monitor by the Monitor Unit FSU201
Replacement Guide: Replacing the E102 CRT Monitor by the Monitor Unit FSU201
Replacement Guide: Replacing the E114/E152/E153 CRT Monitor by the Monitor Unit FSU201
Operating Instructions to the FSU202
Replacement Guide: Replacing the OP500 CRT Monitor by the Monitor Unit FSU202
Instructions: Active Video Cable for OP500 Monitor Unit FSU202
Operating Instructions to the FSU203
Replacement Guide: Replacing the OP500 CRT Monitor by the Monitor Unit FSU203
Operating Instructions to the FSU211
Replacement Guide: Replacing the D145F/D150F CRT Monitor and the Power Supply by the Monitor Unit FSU211
FPDI200: TTL/VGA/DVI to Parallel LCD Video Signal Converter

FSU201 / FSU202 / FSU211

fsu200_crt
  • Replacement for old CRT Screens with TTL/CGA interface
  • Dor OPTRONIC control systems D1xx, E1xx, E7xx, and OP500
  • For SIEMENS S5 based devices with WF470 video interface (SIEMENS order number 6FM1470-xxxxx)
  • Already pre-configured for OPTRONIC control systems
  • Easy installation
  • Perfect image, no flickering, no noise
  • Intuitive on-screen menu, easily operable by use of three buttons
  • 10,4" flat screen, 640x480 pixel
  • Versorgungsspannung: 100-240V AC

FPDI200

Processing of the TTL/CGA video signal in order to present the image on a flat screen is done by the integrated interface card FPDI200. For OEM solutions, the card is separately available.

  • Supported Video Formats: TTL/CGA monochrome and RGB, VGA RGB analog
  • Supported Synchronization Types: Separate VSYNC and HSYNC signals, Sync-On-Green, Composite Sync
  • Maximum Signal Frequency: Pixel clock: 12 to 50MHz, HSYNC: 15 to 110kHz, HSYNC: any
  • Power Supply: 5V +-10%
  • Power Consumption: 2W
  • Operating Temperature: 0° to +40°C
fpdi200

FSU200: Standard Models

FSU201 green TTL Monochrome Display Configured for OPTRONIC CNCs and Operating Stations D1xx, E1xx, E7xx
FSU202 TTL Color Display Configured for OPTRONIC OP500, or devices with SIEMENS WF470 (6FM1470-xxxxx), respectively
Active Video Cable optionally available
FSU203 TTL Color Display Configured for OPTRONIC OP500, or devices with SIEMENS WF470 (6FM1470-xxxxx), respectively
With Active Video Cable
FSU211 green TTL Monochrome Display Model with System Power Supply, configured for OPTRONIC Operating Stations D145F/150F